home *** CD-ROM | disk | FTP | other *** search
- Path: nccunix1.nccnet.com!nccnet!david.seyster
- From: david.seyster@nccnet.com (DAVID SEYSTER)
- Newsgroups: comp.dcom.modems
- Subject: Re: Microcom DeskPorte 28
- Message-ID: <8B9B009.003A00E0A2.uuout@nccnet.com>
- Date: Sun, 28 Jan 96 00:09:00 -0400
- Distribution: world
- Organization: NCC Network - Middletown, RI 02842 (401) 846-1763
- Reply-To: david.seyster@nccnet.com (DAVID SEYSTER)
- References: <8B9B0CA.003A00E08D.uuout@nccnet.com>
- X-Newsreader: PCBoard Version 15.21
- X-Mailer: PCBoard/UUOUT Version 1.10
-
- Bill Antic,
- In a message on 28 January, wrote :
-
- BA> @FROM :vasant@passport.ca N
- BA> @SUBJECT:Re: Microcom DeskPorte 28.8S won't detect carrier loss N
- BA> @UMSGID :<4eefr9$965@forged.passport.ca> N
- BA> @UNEWSGR:01comp.dcom.modems N
- BA>
- BA> phil@zeus.clr.com (Phil Howard) wrote:
- BA>
- BA> >I have a Microcom DeskPorte 28.8S which is initialized as follows:
- BA>
- BA> > AT&FM1L3W1&K3&C1&D2 S7=60 S11=50 S25=0 S36=4 S38=0 S95=47
- BA>
- BA>
- BA> >Does anyone know the secret to Microcom modems? Do they have buggy
- BA> >microcode, or undocumented registers and annoying defaults?
- BA> >--
- BA> >Phil Howard KA9WGN +-----------------------------------------------
- BA> >Unix/Internet/Sys Admin | When freedom is outlawed....
- BA> >CLR/Fast-Tax | ....only outlaws will be free!
- BA> >phil@clr.com +-----------------------------------------------
- BA>
- BA> In your init. string you have left out the command for tone dialing DT
- BA> (DP if you have pulse dialing).
- BA>
- BA> Your init. string, therefore, should start with ATDT.
- BA>
- BA> Without the "DT" the modem will "just sit there".
- BA>
- BA> Goog luck!
- BA>
- Seriously or is this a joke?
- ---
- * ATP/Linux 1.42 * That was then, this is now.
-
-